User Guide
170
Non-Genuine Mode
When you want to use the printer in the Non-Genuine mode, enable the Non-Genuine mode and replace the
toner cartridge.
• If you use the printer in the Non-Genuine mode, the performance of the printer may not be at its optimum. Any
problems that may arise from the use of the Non-Genuine mode are not covered by our quality guarantee. The
continuous use of the Non-Genuine mode may also cause the printer to break down, and any repair charges for such
break down will be incurred by users.
• To disable the Non-Genuine mode, select [Off] for Non-Genuine toner on the operator panel.
1.
Press the <Menu> button.
2.
Press the or button to select [Administrator Menu], and then press the button.
3.
Press the or button to select [Maintenance Mode], and then press the button.
4.
Press the or button to select [Non-Genuine], and then press the button twice.
5.
Press the or button to select [On], and then press the button.
The printer switches to the Non-Genuine mode.
To Next Page
Loading...
Need help?
General
