Fujitsu Airstage J-II Series User Manual

z
SET4 setting
●
Drainage function switch (Slim duct type only)
If contained drain pump is not used, set the drainage function to "Disable" in the drainage
function switching.
(
u
...Factory setting)
SET4-1 Drainage function
u
OFF Enable
ON Disable
*
NOTE:
Always conrm proper setting. Incorrect setting may cause damage from water
leakage.
●
Auto louver grille setting switch (Mini duct type and Slim duct type only)
When Auto louver grille kit (optional parts) is attached, set the Auto louver grille setting
"Enable".
(
u
...Factory setting)
SET4-2 Auto louver grille setting
u
OFF Disable
ON Enable
●
SET4-3 setting prohibited
(
u
...Factory setting)
SET4-3
u
OFF Fixed at OFF
ON Setting prohibited
●
SET4-4 setting prohibited
(
u
...Factory setting)
SET4-4
u
OFF Fixed at OFF
ON Setting prohibited
- (07 - 86) -
FUNCTION SETTING FUNCTION SETTING

Fujitsu Airstage J-II Series Specifications

General

Brand	Fujitsu
Model	Airstage J-II Series
Category	Air Conditioner
Language	English