¢ Group
This function is used when operating a multiple number of remote controller group at a time from
System controller, Touch panel controller, or Central remote controller.
Example:
A
B
C
D
Refrigerant
system 1
Heat
Recovery
system
Refrigerant
system 2
Heat pump
system
System
controller
Group A: “Group” is possible with only one indoor unit.
Group B: “Group” is possible with spanning the RB groups.
Group C: “Group” is possible with spanning the RB group and indoor unit of cooling only type.
Group D: “Group” is possible with spanning the refrigerant systems.
NOTE: The contents of setting may not be reflected by operation status. (B, C, D group)
2-19. Group control method - (05-106) - 2. Control units
CONTROL
SYSTEM
CONTROL
SYSTEM
To Next Page
Loading...
