2-22. Thermostat convertor
¢ Switch location
Set the rotary switch (SET1) and DIP switches (SET2, 4, 5, 6, 7) on the PCB.
SET2
SET3
LED1
SET1
LED2 LED3 LED4
<GRN>
<ORG>
<RED><BLU>
3WIRE
2WIRE
¢ DIP switch setting
• SET1: 2WIRE/3WIRE setting
Remote controller 2WIRE/3WIRE switching SW
Factory setting: 2WIRE
Set matched with the connection method of the remote controller cable to be connected.
2-22. Thermostat convertor - (07-125) - 2. Function settings
FUNCTION
SETTINGS
FUNCTION
SETTINGS
To Next Page
Loading...
