Fujitsu AIRSTAGE J-IIIL - Setting on Indoor Unit PCB

2-2. Setting on indoor unit PCB
Components related to function setting are located on the indoor unit main PCB.
¢ Components location
Related components location is differ depending on the type of the indoor unit as follows:
Type of PCB Type of indoor unit
Type 1
Compact cassette, Cassette, Mini duct, Slim duct/Slim concealed floor, Medium static
pressure duct, High static pressure duct, Floor/ ceiling, Ceiling
Type 2 Wall mounted (ASUB18, 24)
Type 3 Wall mounted (ASUA7, 9, 12, 14TLAV)
Type 4 Circular flow cassette
Type 5 Wall mounted (ASUA4, 7, 9, 12, 14TLAV1)
Type 6 Wall mounted (ASUB30, 36)
Type 7 Compact floor
• Type 1:
SET1SET2
DIP switch
(Type A)
SW1
Main PCB
D
IP switch
(Type B)
Rotary switch
(Type C)
Rotary switch
(Type D)
DIP switch
(Type A)
SW601 SW602
SW604 SW605 SW606 SW607 SW608
SW PCB
2-2. Setting on indoor unit PCB - (07-67) - 2. Function settings
FUNCTION SETTINGS FUNCTION SETTINGS