Fujitsu AIRSTAGE J-IIIL User Manual

2-12. Touch panel controller
¢ Address setting
1. Display the Installer Setting screen, and press “Change” button of “1. The Controller Ad-
dress Number Setting”.
2. If it changes to “1. The controller Address Number Setting” screen, press “01” button of Ad-
dress No., and then press “OK” button.
Example: When setting the Address Number to "01"
3. When it returns to Installer Setting screen, make sure that Address No. is “01”, and then
complete the setting.
01
NOTES:
•
Address No. can be set between “00” and “15”. (Up to 16 of this controller can be installed
in 1 system.)
• When installing 2 or more controllers, set up so that Address No. does not overlap.
• When installing multiple controllers in the same VRF network system, avoid to overlap the
Address No. of following controllers. (Even the same type of controllers, the Address No. is
not allowed to overlap.)
– Touch panel controller, Central remote controller
– Modbus convertor
– Network convertor for LONWORKS, Network convertor for Group remote controller
• For details, refer to the operating manual of the controller.
2-12. Touch panel controller - (07-105) - 2. Function settings
FUNCTION SETTINGS FUNCTION SETTINGS

Fujitsu AIRSTAGE J-IIIL Specifications

General

Brand	Fujitsu
Model	AIRSTAGE J-IIIL
Category	Inverter
Language	English