2. Function settings
To adjust the functions of this product according to the installation environment, various types of
function settings are available.
NOTE: Incorrect settings can cause a product malfunction.
RELATED LINKS
"Setting on outdoor unit PCB
" on page 07-60
"Setting on indoor unit PCB" on page 07-67
"Setting by service tool (UTY-ASGXZ1)" on page 07-74
"Indoor unit (setting by wireless remote controller)" on page 07-78
"Indoor unit (setting by UTY-RNKU)" on page 07-84
"Indoor unit (setting by UTY-RSRY, UTY-RHRY)" on page 07-87
"Indoor unit (setting by UTY-RSKU, UTY-RHKU)" on page 07-90
"Indoor unit (setting by UTY-RNRUZ)" on page 07-93
"Function details" on page 07-96
"Wired remote controller (UTY-RNKU)" on page 07-101
"Simple remote controller (UTY-RSKU, UTY-RHKU)" on page 07-103
"Touch panel controller" on page 07-105
"Central remote controller (UTY-DCGY)" on page 07-106
"Central remote controller (UTY-DCGYZ1)" on page 07-107
"Wired remote controller (Touch panel)" on page 07-109
"Simple remote controller (UTY-RSRY, UTY-RHRY)" on page 07-113
"Network convertor (UTY-VTGX)" on page 07-115
"Network convertor (UTY-VGGXZ1)" on page 07-117
"Signal amplifier" on page 07-119
"Modbus convertor for VRF" on page 07-121
"Network convertor for LonWorks" on page 07-124
"Thermostat convertor" on page 07-125
"Duct static pressure setting" on page 07-128
"Administrative indoor unit setting" on page 07-129
"Energy saving setting on System controller" on page 07-131
"Electricity charge apportionment setting (System controller, Touch panel controller)" on page 07-137
- (07-59) - 2. Function settings
FUNCTION
SETTINGS
FUNCTION
SETTINGS
To Next Page
Loading...
