Fujitsu AIRSTAGE J-IIIL - Page 448

¢
System diagram
Group of Single Split System*
1
Single Split
System
VRF system
To outdoor
units
Multi System*
2
(2 to 4 rooms multi )
(8 rooms multi)
Outdoor unit for
single split / multi system
Indoor unit
Touch panel
controller
Wired remote
c
ontroller
Transmission line
(
non-polar 2-conductor)
Remote
c
ontroller line
Network
convertor
Multi System*
2
Branch
box
Outdoor unit for
Multi system
*1: All indoor units connected to a Network convertor are operated under same status.
*2: Network convertor
is necessary for each indoor unit to control indoor unit individually.
3-1. Network convertor (UTY-VTGX) - (05-110) - 3. Adaptor/Convertor units
CONTROL SYSTEM CONTROL SYSTEM