• SW3: Setting prohibited
SW3 Factory setting
OFF Fixed at OFF ♦
ON Setting prohibited
• SW4: Fahrenheit (
°F)/Celsius (°C) setting
SW4 Factory setting
OFF Celsius (°C)
ON Fahrenheit (°F) ♦
• SW5: Setting prohibited
SW5 Factory setting
OFF Fixed at OFF ♦
ON Setting prohibited
• SW6: Memory backup setting
(Only for wired remote controller)
Set to “ON” to use batteries for the memory backup.
If there is a power failure when this setting is enabled, all the settings stored in the memory
will be saved.
SW6 Memory backup Factory setting
OFF Disable ♦
ON Enable
NOTE: Never turn it “ON” in the case of simple remote controller.
2-10. Wired remote controller (UTY-RNKU) - (07-102) - 2. Function settings
FUNCTION
SETTINGS
FUNCTION
SETTINGS
To Next Page
Loading...
