Fujitsu AIRSTAGE J-IIIL - Page 767

¢ Control input function
NOTES:
• The latest command has priority.
• The indoor units within the same remote controller group are operated in the same mode.
• When function setting is Operation/Stop mode
– In case of Edge input:
Function
setting
DIP switch Connector
Channel
no.
Input signal Command
46-00
SET2-2: Off
(Factory setting)
CNA01 or CNA02
(EXT. IN1)
Ch1
Off → On Operation
On → Off Stop
Operation
Stop
Remote controller
O
n
Off
Indoor unit
On
Ch1 input of
CNA01 or CNA02
– In case of Pulse input:
Function
setting
DIP switch Connector
Channel
no.
Input signal Command
46-00 SET2-2: On
CNA01 or CNA02
(EXT. IN1)
Ch1 Off → On Operation
Ch2 Off → On Stop
On
O
n
Off
Operation
Stop
Remote controller
On
Off
Indoor unit
Ch1 Input
CNA01
o
r
CNA02
Ch2 Input
3-2. External input - (08-13) - 3. Indoor unit
EXTERNAL INPUT AND OUTPUT EXTERNAL INPUT AND OUTPUT