Fujitsu CT114 - Page 28

CT114_Rev2
24
Set Up the Cleaver
Using a fiber holder with the Fiber Holder Adapter
Open the lid of the fiber holder before cleaving the fiber (shown below).
Storing the cleaver
When the Fiber Holder Adapter is installed, the left clamp cannot fully return to its home
position and is not able to sit in the shipping box. Remove the Fiber Holder Adapter for
storage or shipping.
ᴾ
¾ Always leave the fiber holder lid open when cleaving with the Fiber Holder
Adapter.
FH-100 㻌
FH110 㻌