Fujitsu CT114 User Manual

CT114_Rev2
23
Set Up the Cleaver
Fiber Holder Management with FH110 fiber holders.
When a FH110 fiber holder is placed onto the Fiber Holder Adapter, the cleaver will
automatically select the cleave mode that is registered to the fiber holder.
1. When loading the FH110 on the Fiber Holder Adapter, the fiber holder name appears in
the “Fiber Name” window on the [READY] screen.
Se
2. Touch the [Fiber Name] icon to go to the [Fiber Holder Management] menu.
Press and hold the icon to enter the [Fiber Holder Management] screen for the
selected fiber holder. The operator can configure fiber holder settings here.
]

Fujitsu CT114 Specifications

General

Brand	Fujitsu
Model	CT114
Category	Measuring Instruments
Language	English