Fujitsu CT114 User Manual

CT114_Rev2
47
Cleave Menu
Copy a Cleave Mode
You can copy a cleave mode to a new slot by following the steps below:
1. In the [Cleave Mode] menu, select the cleave mode you want to copy, then press
the icon to display the [Copy Cleave Mode] screen.
2. Touch to select, or move the cursor by pressing the UP/DOWN keys, then press the
SET key to copy the previously selected cleave mode into the new slot.
¾
If you select a cleave mode which already exists, the cleaver will
display the following warning.

SET key

Fujitsu CT114 Specifications

General

Brand	Fujitsu
Model	CT114
Category	Measuring Instruments
Language	English