Fujitsu Esprimo E5 Series - Page 13

73 pages

To Next Page

To Previous Page

Ports and operating elements

Device with alternating voltage socket and m onitor socket

1 = Alternating voltage socket (AC IN)

2 = Monitor socket

3 = Ports for external devices

(device-dependent)

4 = Slot covers (shown here: low-proﬁle

boards)

Fujitsu 9

Main Page

Table of Contents7
Your ESPRIMO9
Validity of the Reference Manual9
Notational Conventions10
Ports and Operating Elements11
Front11
Rear11
Important Notes14
Safety Information14
Transporting the Device14
Cleaning the Device15
Energy Saving, Disposal and Recycling15
CE Marking15
FCC Compliance Statement16
- FCC Class B Compliance Statement16
- FCC Radiation Exposure Statement16
Getting Started17
Unpacking and Checking the Delivery17
Steps for Initial Setup17
Setting up the Device18
- Vertical Operating Position (Optional)19
Connecting the Device to the Mains Supply20
Connecting External Devices21
- Connecting the Cables21
- Disconnecting the Cables21
- Ports on the Device22
- Connecting a Monitor22
- Connecting the Mouse23
- Connecting the Keyboard23
- Connecting External Devices to the Serial Interface24
- Connecting External Devices to the USB Ports24
Switching on for the First Time: Installing the Software25
- Switching on the Monitor and Device25
- Installing the Software26
Operation27
Switch the Device on27
Switching on a Device When the Lithium Battery Is Discharged (0-Watt Devices)27
Switching off the Device28
Indicators on the Device29
Keyboard30
- Important Keys and Keyboard Shortcuts30
Settings in BIOS Setup32
Property and Data Protection32
- Anti-Theft Protection and Lead-Sealing32
- Mechanical Casing Lock (Optional)33
- BIOS Setup Security Functions33
- Access Authorisation Via Smartcard34
- Operating the Smartcard Reader (Optional)34
Problem Solutions and Tips35
Help if Problems Occur35
Troubleshooting35
- Power Indicator Remains off after You Have Switched on Your Device35
- The Device Cannot be Switched off with the ON/OFF Switch36
- The Device Cannot be Switched on with the ON/OFF Switch (0-Watt Devices)36
- Monitor Remains Blank36
- No Mouse Pointer Displayed on the Screen37
- Time And/Or Date Is Not Correct37
- Error Messages on the Screen38
Installing New Software38
Restoring the Hard Disk Contents38
Tips38
System Expansions39
Information about Boards40
Removing the Casing Cover41
Reattaching the Casing Cover42
Opening the Drive Cage43
Closing the Drive Cage44
Overview of Drive Bays and Drives in Your Device44
Installing and Removing the Accessible 545
- Inch Drive45
- Fitting the Drive Cover for the 5 Inch Drive45
- Installing an Accessible Drive46
- Removing an Accessible Drive48
Installing/Removing a Smartcard Reader, WLAN Module or Multicard Reader49
Inch)49
- Preparing to Install/Remove Components49
- Attaching the WLAN Module to the Module Carrier50
- Screwing the Smartcard Reader Onto the Module Holder50
- Module51
- Reader52
- Removing the Smartcard Reader from the Module Holder53
- Removing the WLAN Module from Carrier53
- Completing Installation/Removal of Components54
Installing and Removing the Hard Disk Drive55
- Installing a Hard Disk Drive55
- Removing the Hard Disk Drive57
Installing and Removing Boards59
- Installing and Removing High-Proﬁle Boards (Device-Dependent)59
- Installing and Removing Low-Proﬁle Boards (Device-Dependent)63
Installing and Removing Heat Sinks67
- Removing the Heat Sink67
- Installing the Heat Sink67
Mainboard Expansions67
- Upgrading Main Memory67
- Processor, Replacing68
- Replacing the Lithium Battery69
Technical Speciﬁcation70
Index71

Fujitsu Esprimo E5 Series - Page 13

Table of Contents

Related product manuals