Fujitsu PRIMERGY RX1330 M4 Upgrade And Maintenance Manual

Figure 54: Removing the foam
▶
Remove the foam.
▶
Install the additional fan, see "Installing the new fan module" on page
181.
Concluding steps
▶
"Installing the air duct" on page
64.
▶
"Reassembling" on page 52.
▶
"Connecting the power cord" on page 56.
▶
"Connecting the power cord" on page 56.
▶
"Resuming BitLocker functionality" on page 86.
Power supply unit (PSU)
132 Upgrade and Maintenance Manual RX1330 M4

Fujitsu PRIMERGY RX1330 M4 Specifications

General

Chipset	Intel C246
Processor	Intel Pentium, Intel Celeron
Memory Type	DDR4
Memory	Up to 64 GB
Memory Slots	4 DIMM slots
Drive Bays	4 x 3.5-inch or 8 x 2.5-inch
Network	2x 1GbE onboard, optional additional NICs
Power Supply	450W
Form Factor	1U
RAID Controller	optional SAS RAID controller