Fujitsu PRIMERGY RX1330 M4 Upgrade And Maintenance Manual

Removing the SAS expander board
Figure 86: Disconnecting SAS cables
▶
Disconnect the power cable from the HDD backplane.
▶
Disconnect the two SAS cables from the SAS expander board.
Figure 87: Removing the SAS expander board (A)
Hard disk drive (HDD) / solid state drive (SSD)
168 Upgrade and Maintenance Manual RX1330 M4

Fujitsu PRIMERGY RX1330 M4 Specifications

General

Chipset	Intel C246
Processor	Intel Pentium, Intel Celeron
Memory Type	DDR4
Memory	Up to 64 GB
Memory Slots	4 DIMM slots
Drive Bays	4 x 3.5-inch or 8 x 2.5-inch
Network	2x 1GbE onboard, optional additional NICs
Power Supply	450W
Form Factor	1U
RAID Controller	optional SAS RAID controller