Fujitsu PRIMERGY RX1330 M4 Upgrade And Maintenance Manual

Removing the ODD lock
▶
If an ODD has been installed, remove the ODD, see "Removing the ODD"
on page 262
.
Figure 94: Removing the ODD lock (A)
▶
Push the ODD lock in direction of the arrow.
Figure 95: Removing the ODD lock (B)
▶
Remove the ODD lock.
Hard disk drive (HDD) / solid state drive (SSD)
174 Upgrade and Maintenance Manual RX1330 M4

Fujitsu PRIMERGY RX1330 M4 Specifications

General

Chipset	Intel C246
Processor	Intel Pentium, Intel Celeron
Memory Type	DDR4
Memory	Up to 64 GB
Memory Slots	4 DIMM slots
Drive Bays	4 x 3.5-inch or 8 x 2.5-inch
Network	2x 1GbE onboard, optional additional NICs
Power Supply	450W
Form Factor	1U
RAID Controller	optional SAS RAID controller