Fujitsu PRIMERGY RX1330 M4 Upgrade And Maintenance Manual

Removing an SFP+ transceiver module
Figure 110: Removing the protective cap
▶
If present, remove the protective cap from the SFP+ transceiver module.
CAUTION
▶
Keep the protective cap for future use.
Expansion cards and backup units
194 Upgrade and Maintenance Manual RX1330 M4

Fujitsu PRIMERGY RX1330 M4 Specifications

General

Chipset	Intel C246
Processor	Intel Pentium, Intel Celeron
Memory Type	DDR4
Memory	Up to 64 GB
Memory Slots	4 DIMM slots
Drive Bays	4 x 3.5-inch or 8 x 2.5-inch
Network	2x 1GbE onboard, optional additional NICs
Power Supply	450W
Form Factor	1U
RAID Controller	optional SAS RAID controller