Fujitsu PRIMERGY RX1330 M4 Upgrade And Maintenance Manual

▶
"Removing the air duct" on page 63
.
▶
"Locating the defective component" on page 44.
Removing the defective memory module
▶
Remove the memory module, see "Removing memory modules" on
page 238.
Installing the new memory module
▶
Install the memory module, see "Installing memory modules" on page 235.
Concluding steps
▶
"Installing the air duct" on page 64.
▶
"Reassembling" on page 52.
▶
"Connecting the power cord" on page 56.
▶
"Switching on the server" on page 58.
▶
"Resetting the error status after replacing memory modules or CPU" on
page 76.
▶
"Enabling replaced components in the BIOS" on page 81.
▶
"Resuming BitLocker functionality" on page 86.
Main memory
240 Upgrade and Maintenance Manual RX1330 M4

Fujitsu PRIMERGY RX1330 M4 Specifications

General

Chipset	Intel C246
Processor	Intel Pentium, Intel Celeron
Memory Type	DDR4
Memory	Up to 64 GB
Memory Slots	4 DIMM slots
Drive Bays	4 x 3.5-inch or 8 x 2.5-inch
Network	2x 1GbE onboard, optional additional NICs
Power Supply	450W
Form Factor	1U
RAID Controller	optional SAS RAID controller