Fujitsu PRIMERGY RX1330 M4 - Page 286

▶
Install the corresponding riser module, see "Installing a riser module" on
page 61.
Concluding steps
▶
"Reassembling" on page
52
.
▶
"Connecting the power cord" on page 56.
▶
"Switching on the server" on page 58.
▶
"Resuming BitLocker functionality" on page 86.
14.3 Removing the serial interface
Upgrade and Repair Unit
(URU)
Hardware: 5 minutes
Tools: tool-less
Preliminary steps
▶
"Suspending BitLocker functionality" on page 65
.
▶
"Shutting down the server" on page 45.
▶
"Disconnecting the power cord" on page 46.
▶
"Getting access to the component" on page 48.
Removing the serial interface
▶
Remove the corresponding riser module, see "Removing a riser module" on
page 59.
Serial interface
286 Upgrade and Maintenance Manual RX1330 M4