Fujitsu PRIMERGY RX1330 M4 Upgrade And Maintenance Manual

HDD prefailure detection
Depending on your hardware configuration HDD prefailure detection will be
supported.
The requirements are:
–
iRMC S5 Firmware 1.2 or later
–
supported OOB RAID system
16.2.2.2 Indicator on the ODD
ODDs may have an indicator or not.
Figure 242: Indicator on the ODD (example)
1 Activity indicator
Activity indicator (1)
Status Description
off The ODD is inactive.
green on The storage medium is being accessed.
Appendix A
350 Upgrade and Maintenance Manual RX1330 M4

Fujitsu PRIMERGY RX1330 M4 Specifications

General

Chipset	Intel C246
Processor	Intel Pentium, Intel Celeron
Memory Type	DDR4
Memory	Up to 64 GB
Memory Slots	4 DIMM slots
Drive Bays	4 x 3.5-inch or 8 x 2.5-inch
Network	2x 1GbE onboard, optional additional NICs
Power Supply	450W
Form Factor	1U
RAID Controller	optional SAS RAID controller