CAUTION
▶
Advise your contact persons that they must provide you with all
recovery keys which belong to the system to restore them in the
TPM later.
Preliminary steps
Preliminary steps are not necessary, if a system board has to be
replaced and the TPM is used again.
▶
Before removing the TPM board, remove the BitLocker protection and
decrypt the volume, see "Removing BitLocker protection and decrypting the
volume" on page 190
.
▶
Disable the TPM in the system board BIOS, see "Disabling the TPM in the
system board BIOS" on page 190.
▶
"Suspending BitLocker functionality" on page 61.
▶
"Unlocking the server" on page 39.
▶
"Removing the bay cover" on page 40.
▶
"Shutting down the server" on page 41.
▶
"Disconnecting the power cord" on page 42.
▶
"Getting access to the component" on page 43.
System board and components
TX1310 M5 Upgrade and Maintenance Manual 189
To Next Page
Loading...
Need help?
General