Furuno NAVnet TZtouch2 - How to Edit a Point on the Screen

4. POINTS, BOUNDARIES
4-10
4.7.5 How to edit a point on the screen
1. Tap the point to edit to show the pop-up menu.
2. To change the name of the point, tap [Name] to display the software keyboard.
Change the name as follows:
1) Tap the character to edit.
2) Tap an alphanumeric character on the software keyboard.
3) Repeat steps 1) and 2) to complete the name. The maximum length of the
name is 20 alphanumeric characters.
4) Tap [] to confirm.
Point editing tools
Switch to the numeric
software keyboard.
Clear all characters.
Cursor
Switch to the alphabet
software keyboard.
Shift
cursor.
Delete character selected.
Confirm entry.
Close keyboard
without saving.