Furuno NAVnet TZtouch2 - How to Measure the Bearing with the EBL

6. RADAR
6-11
6.8.6 How to measure the bearing with the EBL
Method 1: From the data area
Open the data area. Tap the EBL indication in the [EBL/VRM] data box. Drag the EBL
or slider to set the EBL. Tap [End EBL] to anchor the EBL and finish. The bearing of
the EBL appears to the left of the slider bar and in the [EBL/VRM] data box.
To clear the EBL, open the pop-up menu, then tap [EBL] and [Clear].
OR
Tap [End EBL]
to anchor EBL
and exit.
Drag
VRM
EBL/VRM
box
84.7°
84.7°
Bearing
to object
84.7°
Drag
EBL
Bearing
to object
84.7°
End EBL
End EBL
End EBL
Drag slider
(or tap bar or +, - icons)
Drag slider
(or tap bar or +, - icons)
RADAR
DATA
ROUTE
EBL
EBL
EBL
EBL