EasyManua.ls Logo

Furuno NAVnet TZtouch2 - Radar Menu

Furuno NAVnet TZtouch2
367 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
6. RADAR
6-28
6.26 Radar Menu
This section provides the descriptions for the radar menu items not mentioned earlier.
Radar Initial Setup
[Antenna Rotation]: Starts or stop antenna rotation. For the serviceman. See the in-
stallation manual.
[Antenna Heading Align]: Compensates for error in positioning of the antenna unit
at installation. See the installation manual for the adjustment procedure.
[Main Bang Suppression]: Reduces main bang, the clutter appearing at the screen
center. See the installation manual for the adjustment procedure.
[Enable Sector Blanking]: Sets the area(s) where to prevent transmission. For ex-
ample, set the area where an interfering object at the rear of the antenna would pro-
duce a dead sector (area where no echoes appear) on the display. See the installation
manual for the procedure.
Antenna position
[Longitudinal (from bow)], [Lateral (-Port]: Set the position of the radar antenna in
relation to the bow and port.
Other items
[Antenna Height]: Set the height of the radar antenna above the waterline. Not avail-
able (grayed out) with the radar sensor DRS4DL/DRS4DL+.

Table of Contents

Other manuals for Furuno NAVnet TZtouch2

Related product manuals