1. SYSTEM INTRODUCTION
1-17
1.8 How to Edit the Display Icons
The default home screen arrangement provides seven displays (icons) in configura-
tions according to the equipment that you have in your network. If the arrangement
does not meet your requirements, you can change the display icons to suit your
needs. You can have a maximum of 16 display icons, in full screen, 2-way or 3-way
split screens. For example, you can show the radar and sounder (fish finder) displays
in a two-way split screen.
The displays available depend on the display division selected and your system con-
figuration. The table below outlines the display divisions and available displays.
*: The four-way split option is available only for TZT2BB.
Note: For vessels with more than one TZtouch2 on the same network, changes made
to displays are shared and applied to the other TZtouch2 units.
1.8.1 How to add a new display icon
1. Tap the [Home] icon to show the home screen.
2. Tap the + icon, shown right. (If the icon is not shown, this means
that all available display icons (16) have been used. Erase an
unnecessary icon to make room. See subsection 1.8.2.)
3. Follow the instructions below to create a display icon.
Your arrangement is then opened on the screen and the home screen is updated ac-
cording to your arrangement.
Display division Available displays
Full screen Plotter, weather, radar, sounder, instrument, camera, multi
sounder, side scan, cross section, 3D history, Yamaha Engine
Manager
Two-way split Plotter, radar, sounder, multi sounder, side scan
Three-way split, four-
way split*
Plotter, radar, sounder, instrument, camera, multi sounder,
side scan, cross section, 3D history, Yamaha Engine Manager
Display
choices
Display
division
choices
Custom display areaCustom display area
Drag
display
division
Drag
display
division
Drag
display
type*
Drag
display
type*
Tap to save icon.
*: Drag the display page to the center of
the location where you want to place it.
To Next Page
Loading...
