Furuno NAVnet TZtouch2 - How to Activate or Deactivate the Target Analyzer

6. RADAR
6-25
The figure below shows an actual radar image with the Target Analyzer
™
activated.
Operating mode and range
Single range: 0.063 to 72 NM, Target Analyzer
™
, single range: 0.063 to 24 NM
Dual range: 0.063 to 12 NM, Target Analyzer
™
, dual range: 0.063 to 12 NM
6.23.1 How to activate or deactivate the target analyzer
™
To activate the [Target Analyzer], select [Rain] or [Target] from the [Layers] menu.
[Rain] emphasizes rain clutter, [Target] emphasizes target echoes.
To deactivate the [Target Analyzer], select [Off] from the [Layers] menu.
Target Analyzer
TM
: OFF Target Analyzer
TM
: Target Mode
Target Analyzer
TM
: Rain Mode
Approaching
target (red)
Approaching
target (red)
Approaching
targets (red)
Approaching
targets (red)
Rain (blue)Rain (blue)
Target Mode Rain Mode
Approaching targets: RED
Other targets: GREEN
Approaching targets: RED
Rain: BLUE
Other targets: GREEN