1. SYSTEM INTRODUCTION
1-15
The Sensor icons show the sensors connected in the system and their status, in the
following colors. White: Sensor normal; Red: Sensor error; Gray: Sensor inactive
(stopped).
The Functions section provides the features mentioned below. If the item is hidden,
drag up or down from [Settings]. ([MOB] is fixed.)
[MOB]: Enters a MOB mark (to mark man overboard location on the plotter and radar
displays). See section 1.18.
[Settings]: Menus (general, plotter, radar, sounder, etc.) for customization of the sys-
tem. See section 1.15.
[Tide]: Opens the tide graph.
[Lists]: Accesses the lists (points, routes, AIS, DSC, ARPA, Alarms).
[Catalog]: Opens the list of charts installed in your system.
[Fax30]*: Opens the FAX-30 operation screen.
[Fusion]*: Opens the FUSION operation screen.
[SiriusAudio]*: Opens the SiriusAudio control panel.
[eGuide]: Opens the abbreviated operator’s manual. You can get the latest version of
the operator’s manual by accessing the quick response code provided in the introduc-
tion section of the guide.
* Requires appropriate equipment connection. Not shown otherwise.
The Display icons select corresponding displays. See the next section for details.
1.6 How to Set a Nickname for Your Unit
If your vessel has more than one NavNet TZtouch2/3 unit connected to the same net-
work, differentiating between the units can become difficult. You can use the nickname
feature to help tell each one apart. The nickname appears on the Home screen, in the
top status bar, between the time/date and sensor icons. By default, the unit model is
set as the nickname; for example “TZTL12F”.
To change the nickname, tap the [Home] icon to show the home screen then tap the
nickname indication.
Note: You can also change the nickname from the [Sensor List] in the [DATA ACQUI-
SITION] section of the [Initial Setup] menu (See "DATA ACQUISITION
section" on page 15-7).
Tap
To Next Page
Loading...
