Furuno NAVnet TZtouch2 - 8 Multi Beam Sonar Dff-3 D; Menu Operations; How to Start;Stop Transmission; How Set the Background Color

8-1
8. MULTI BEAM SONAR DFF-3D
This chapter describes the display screens (modes) available with the Multi Beam So-
nar DFF-3D, which displays images of the underwater and the ocean floor with high
precision. Four display screens are provided, multi-sounder, side scan, cross section,
and 3D sounder history.
8.1 Menu Operations
This section covers the top layer of the [Multi Beam Sonar] menu. For details regard-
ing menu operations with each of the displays, see the respective section.
8.1.1 How to start/stop transmission
You can start/stop transmissions from the multi-beam sonar by using the menu.
1. Open the Home screen, then tap [Settings][Multi Beam Sonar].
2. Tap the [Multi Beam Sonar Transmit] item to toggle between [OFF] and [ON].
8.1.2 How set the background color
You can set the background color for Day mode and Night mode to suit your prefer-
ences.
1. Open the Home screen, then tap [Settings][Multi Beam Sonar].
2. Tap [Day Background Color] or [Night Background Color] as required.
3. Tap the desired color.
Display Section no.
Multi-Sounder section 8.3
Side Scan section 8.4
Cross Section section 8.5
3D Sounder section 8.6