6. RADAR
6-3
Method 2: Radar Control data box in data area
The gain can be adjusted from the data area, with the [Radar Control] box in the [RA-
DAR] data box. On the box, tap the [M/A] part of the [Gain] flipswitch to switch between
manual and automatic adjustment. For manual adjustment, drag the slider to adjust.
Tap [End] to finish.
Note: The name (model) of your radar appears at the top of the control box.
All items set for
manual adjustment
Tap “A” to alternate
between auto and
manual.
Drag
slider
(or tap
bar or
+, -
icons).
79
RADAR
DATA
ROUTE
Manual
adjustment
Current
setting
Gain
To Next Page
Loading...
