Furuno NAVnet TZtouch2 - Page 233

8. MULTI BEAM SONAR DFF-3D
8-16
How to set color shading
Open the menu, select Multi Beam to show the menu for setting color shading.
[Color Mode] selected to [Seabed]
Menu item Description Setting options
[Seabed Color] For setting multi tone or single tone. [Classic Hue], [Invert-
ed Classic Hue], [Red
Hue], [Blue Hue],
[Green Hue], [Yellow
Hue]
[Fish Monochrome Color] For setting single tone or single color. [Gray Hue], [Brown
Hue], [Red], [Green],
[Blue], [Cyan], [Magen-
ta], [Black Or White],
[Pink], [Light Green],
[Yellow]
[Auto Seabed Shading] Use automatic or manual seabed shading.
Note: Objects that are detected outside of
the selected color range are shown on-
screen in white color.
[ON], [OFF]
[Color Mode] selected to [Seabed] [Color Mode] selected to [Fish]
Seabed Color Classic Hue
Fish Monochrome Color Gray Hue
Minimum Value 0 m
Auto Seabed Shading
Maximum Value 50 m
Auto Fish Shading
Minimum Value 0 m
Maximum Value 50 m
Fish Color Classic Hue
Seabed Monochrome Color Gray Hue
Minimum Value 0 m
Auto Seabed Shading
Maximum Value 50 m
Auto Fish Shading
Minimum Value 0 m
Maximum Value 50 m
Manual
mode
Auto
mode
m
Tap [A] to switch between automatic and
manual depth/color shading scale setting
mode.