Furuno NAVnet TZtouch2 - Page 289

12. INSTRUMENT-RELATED DISPLAYS
12-28
12.3.3 How to switch between displays
You can switch between displays by two methods:
• Swipe screen from bottom up or top down.
• Tap the screen to show the pop-up window, then tap the indication in the window,
as in the example below.
12.3.4 How to select the data to display in a data box
Tap a data box in a Yamaha engine display, and a pop-up menu appears. Tap the de-
sired data on the pop-up menu to show it in the selected data box. The example below
shows the pop-up menu available with the boat status display.
For the engine combo display, only the data boxes in the top and lower sections can
be changed.
Pop-up window
Pop-up
menu
(example)
Pop-up
menu
(example)