Furuno NAVnet TZtouch2 User Manual

15. OTHER FUNCTIONS
15-13
15.6.2 How to hide unnecessary charts on the chart catalog list
1. Tap [Filter] on the chart catalog list title bar to show the [Filter charts] window.
2. Turn off the flipswitches of charts that you want to hide. The factory setting shows
all charts. To restore all charts, tap [Reset Filters].
3. Tap < on the title bar to return to the chart catalog list.
4. Tap the close button close the chart catalog list.
15.6.3 How to update or add charts
Free (USA and NOAA) and for-fee NavNet TZtouch2 compatible charts are provided
by FURUNO and Mapmedia. Go to the URLs shown below to download chart data.
Download the chart file to your desktop. Unzip the file, then copy it to the root of a mi-
croSD card. Insert the card into one of the SD card slots on the display unit, or a slot
in the SD Card Unit (SDU-001). For the detailed procedure, refer to the instructions on
the FURUNO website.
A for-fee chart requires that you enter its chart unlock code. Go to the Home screen
and tap [Catalog] to show the [Charts Catalog] display. Tap the [Insert Code] button
then enter the chart unlock code from the software keyboard.
15.6.4 How to delete charts
Before replacing a chart you should delete the old chart data on every NavNet
TZtouch2 unit. Only delete the chart data that you intend to replace or no longer re-
quire.
Open the charts catalog. Tap the trashcan icon of the chart to delete. You are asked
"ARE YOU SURE YOU WANT TO DELETE THIS FILE?" Tap [OK] to delete the file.
Where to obtain chart data:
Mapmedia
http://www.mapmedia.com/charts-catalog.html
C-MAP

Furuno NAVnet TZtouch2 Specifications

General

Brand	Furuno
Model	NAVnet TZtouch2
Category	Monitor
Language	English