13
＜
Before Use
＞
$FFHVVRULHV
• LT2F3500;H Transmitter battery pack - the (3500mAh) transmitter
Lithium
-polymer battery pack may be
easily exchanged with a fresh one to provide enough capacity for extended Àying sessions.
• Trainer cord - the optional training cord may be used to help a beginning pilot learn to Ày easily by placing
the instructor on a separate transmitter. Note that the T18MZ-WC transmitter may be connected to another
T18MZ-WC system, as well as to any other models of Futaba transmitters. The T18MZ-WC transmitter uses
the newer “Micro” rectangular type cord plug. Both Micro- to-Micro and Micro-to-round plug style trainer
cords are available.
• Neck strap - a neck strap may be connected to your T18MZ-WC system to make it easier to handle and
improve your Àying precision since your hands won’t need to support the transmitter’s weight.
• Y-harnesses, servo extensions, etc - Genuine Futaba extensions and Y-harnesses, including a heavy-duty
version with heavier wire, are available to aid in your larger model and other installations.
• Gyros - a variety of genuine Futaba gyros are available for your aircraft or helicopter needs.
• Governor - for helicopter use. Automatically adjusts throttle servo position to maintain a constant head speed
regardless of blade pitch, load, weather, etc.
• Receivers - various models of Futaba receivers may be purchased for use in other models. (Receivers for 2.4GHz
types are available.)
• Servos - there are various kinds of servos. Please choose the Futaba servos that are suited to the model and its
purpose. If you utilize a S.BUS system, you should choose a S.BUS servo. An analog servo cannot be used if
"FASSTest12CH mode" is used.
• Telemetry sensor - please purchase an optional sensor, in order to utilize bidirectional communication system
and to acquire the information from a model high up in the sky.
[
Temperature sensor : SBS-01T/TE@
>Altitude sensor : SBS-01/02A@
[RPM sensor
magnet type : SBS-01RM@
[RPM sensor
optical type : SBS-01RO@
[RPM sensor
brushless motor type : SBS-01RB@
[GPS sensor : SBS-01G@
[Voltage sensor : SBS-01V@
[Current sensor : SBS-01C@
[S.BUS servo sensor : SBS-01S@
The following additional accessories are available from your dealer. Refer to a Futaba catalog for more
information:
To Next Page
Loading...
