70
<
Linkage Menu
>
+(/,&237(5
$,53/$1(
*/,'(5
)81&7,2162)/,1.$*(0(18
The Linkage Menu has all of the functions you
will need to perform model addition, model type
selection, frequency setting, end point setting, and
other model basic settings.
ŏ5HWXUQWR+RPHVFUHHQ
ŏ:KHQ\RXWRXFKWKH/LQNDJH0HQXEXWWRQRQWKHKRPHVFUHHQWKHPHQX
VKRZQEHORZLVFDOOHGXS7RXFKWKHEXWWRQRIWKHIXQFWLRQ\RXZDQWWRVHW
The functions which can be selected depend on
which model type you are using. A typical menu
screen is shown below.
/LQNDJH0HQXIXQFWLRQVWDEOH
ƔServo Monitor : Displays the servo test and operation position
ƔModel Select : Model addition, call, deletion, copy, model name setting
ƔModel Type : Model type, wing type, switch type, etc. selection
ƔPicture : Picture selection and setting for each model
ƔSound : Sound recording and playback
ƔSystem Type : System selection, receiver link, telemetry.
ƔFunction : Channel assignment of each function can be changed
ƔSub-Trim : Adjusts the neutral position of each servo
ƔServo Reverse : Servo direction reversal
ƔFail Safe : Fail safe function and battery fail safe function setting
ƔEnd Point (ATV) : Servo basic rudder adjustment and limit setting
ƔThrottle Cut : Stops the engine safely and easily (airplane and helicopter only)
ƔIdle Down : Lowers the idle speed of the engine (airplane and helicopter only)
ƔSwash Ring : Limits the swash travel within a ¿xed range to prevent linkage damage (helicopter only)
ƔSwash : Swash AFR and linkage correction function (helicopter only)
ƔTimer : Timer setting and lap time display
ƔDial Monitor : Dial, slider, and digital trim position display and setting
ƔFunction Name : Function Name can be changed
ƔTelemetry : Displays various data sent from the receiver
ƔSensor : Various telemetry sensors setting
ƔSensor
Name : Change of a sensor name
ƔTelemetry Setting : Data logging of telemetry
ƔWarning : Warning sound and vibration setting
ƔData Reset : Model memory data reset (by various item)
Condition Hold function ON/OFF button
)RUDGHWDLOHGGHVFULSWLRQVHHS&RQGLWLRQ+ROGIXQFWLRQ