170
<
Data
>
5HVHW
Linear curve adjustment
Rate A and Rate B can be adjusted separately or
simultaneously.
>6HWWLQJPRGHV@
*[Separate] mode:5DWHVDUHDGMXVWHG
separately.
*[Combined] mode:5DWHVDUHDGMXVWHG
simultaneously.
>6HWWLQJPHWKRG@
1. Select the setting mode.
7RXFKWKH5DWH$RU5DWH%EXWWRQ
8VHWKHDGMXVWPHQWEXWWRQVWRVHWWKHUDWH
*Initial value: +100.0%
$GMXVWPHQWUDQJHa
The curve can also be offset horizontally in the
vertical direction and the rate reference point can be
offset to the left or right.
>2IIVHWWLQJWKHFXUYHKRUL]RQWDOO\LQWKHYHUWLFDO
GLUHFWLRQ@
7RXFKWKH2IIVHWEXWWRQ
8VHWKHDGMXVWPHQWEXWWRQVWRPRYHWKHFXUYH
KRUL]RQWDOO\XSDQGGRZQ
*Initial value: +0.0%
>2IIVHWWLQJWKHUDWHUHIHUHQFHSRLQW
WRWKHOHIWRUULJKW@
7RXFKWKH;2IIVHWEXWWRQ
8VHWKHDGMXVWPHQWEXWWRQVWR
move the reference point to the
left or right.
*Initial value: +0.0%
Setting by curve type
When the curve type is selected as described above, adjustment buttons corresponding to the curve type appear
on the original screen. Adjust each curve as described below.
(Linear curve)
5DWHDGMXVWPHQWEXWWRQV
ŏ5HWXUQWRLQLWLDOYDOXH