FUTABA T18MZ WC User Manual

37
＜
Basic Operation
＞
5HJLVWUDWLRQRIWKHXVHUV
QDPH
T18MZ-WC transmitter can register user's name.
How to register user's name
1. Turn on the power of the transmitter.
2. Push the area of the user's name shown on the
home screen or the "user's name" in the system
menu. Then the User's Name Set screen will
pop up.
3. Push the user's name. Then the keyboard will
pop up. You can use up to 32 characters as a
user's name. Use the keyboard on the screen
to enter user's name.
6SDFHNH\
4. Push "Return" key to return to the previous
screen after entering the user's name.
(If you want to protect the user's name)
If you don't want anybody else to change your user's
name, set your ID in the following way.
*Please be aware that you will not able to change user's name if
you forget your password.
1. Make sure that the security mode is "User's
name", and then push the User ID button.
2. Enter your password, using keyboard on the
screen.

You will need to enter your password
for changing the user's name, the next time
you turn on the power.
*Even if you enter the same character, your
SDVVZRUGZLOOEHLGHQWLÀHGGLIIHUHQWO\GHSHQGLQJRQ
whether you are using "Transform" mode or "Direct"
mode for inputting.
How to reset software
If the screen freezes for some reason and you cannot
edit, the transmitter power supply is not fully off
even if you turn OFF the power switch. You will
need to remove the battery and reinsert it again. In
this case, the power restarts in “Cold mode”. Even
though the screen freezes, all the other functions for
radio control operation remain operative.

FUTABA T18MZ WC Specifications

General

Brand	FUTABA
Model	T18MZ WC
Category	Remote Control
Language	English