Garmin EDGE 830 - Auto Lap; Marking Laps by Position

Title Auto Lap (fenix 2)
Identifier GUID-9E4D6AB0-1500-45C2-900C-3756A4C0A0F7
Language EN-US
Description Base on concept topic from forerunner 910XT manual.
Version 1
Revision 4
Changes
Status Released
Last Modified 22/04/2017 22:45:37
Author gerson
Auto Lap
Title Marking Laps by Position
Identifier GUID-24EB7772-9FBE-448F-842B-799CF200895E
Language EN-US
Description
Version 8
Revision 5
Changes Updated menu path conditions
Status Released
Last Modified 08/04/2019 15:27:23
Author cozmyer
Marking Laps by Position
You can use the Auto Lap feature to mark the lap at a specific position automatically. This feature is helpful for
comparing your performance over different parts of a ride (for example, a long climb or training sprints). During
courses, you can use the By Position option to trigger laps at all of the lap positions saved in the course.
1 Select > Activity Profiles.
2 Select a profile.
3 Select Auto Features > Auto Lap > Auto Lap Trigger > By Position > Lap At.
4 Select an option:
• Select Lap Press Only to trigger the lap counter each time you select and each time you pass any of
those locations again.
• Select Start and Lap to trigger the lap counter at the GPS location where you select and at any location
during the ride where you select .
• Select Mark and Lap to trigger the lap counter at a specific GPS location marked before the ride and at
any location during the ride where you select .
5 If necessary, customize the lap data fields (Adding a Data Screen, page 101).
Customizing Your Device 105