Garmin EDGE 830 - Viewing Your Emergency Contacts; Requesting Assistance; Turning Incident Detection on and off

Title Viewing Your Emergency Contacts
Identifier GUID-E677A5BC-EA5A-4BF8-92D7-FA9AC2BC404D
Language EN-US
Description
Version 4
Revision 5
Changes Fixed app name and updated conditions
Status Released
Last Modified 08/04/2019 15:50:55
Author cozmyer
Viewing Your Emergency Contacts
Before you can view your emergency contacts on your device, you must set up your rider information and
emergency contacts in the Garmin Connect app.
Select > Safety & Tracking > Emergency Contacts.
Your emergency contacts' names and phone numbers appear.
Title Requesting Assistance
Identifier GUID-11A071F8-B487-4E55-98DC-9AF0BC08521C
Language EN-US
Description
Version 3
Revision 4
Changes Removed condition and updated varid for cancelling.
Status Released
Last Modified 08/04/2019 15:50:37
Author cozmyer
Requesting Assistance
Before you can request assistance, you must enable GPS on your Edge device.
1 Hold for five seconds to activate the assistance feature.
The device beeps, and sends the message after the five-second countdown is complete.
TIP: You can select before the countdown is complete to cancel the message.
2 If necessary, select Send to send the message immediately.
Title Turning Incident Detection On and Off
Identifier GUID-1EA3620E-3C99-49FF-A485-B5F082C5CB2F
Language EN-US
Description
Version 6
Revision 5
Changes Add the specific bike profiles and default behavior.
Status Released
Last Modified 10/12/2021 12:35:25
Author wiederan
Turning Incident Detection On and Off
1 Select > Safety & Tracking > Incident Detection.
2 Select the activity profile to enable incident detection.
NOTE: Incident detection is enabled by default for the road, gravel, commute, tour, and ebike activity profiles
only. Depending on the terrain and your riding style, false positives can occur.
68 Connected Features