Garmin EDGE 830 - Updating the Rally Software Using the Edge Device

Title Power Phase Data
Identifier GUID-576EE16F-43DC-49A8-B501-C6D4719C6426
Language EN-US
Description
Version 1
Revision 4
Changes
Status Released
Last Modified 22/04/2017 20:25:37
Author wiederan
Power Phase Data
Power phase is the pedal stroke region (between the start crank angle and the end crank angle) where you
produce positive power.
Title Platform Center Offset
Identifier GUID-932298C9-1264-4B08-8A10-8F5A5CE8EDE1
Language EN-US
Description
Version 1
Revision 5
Changes
Status Released
Last Modified 22/04/2017 20:25:26
Author wiederan
Platform Center Offset
Platform center offset is the location on the pedal platform where you apply force.
Title Updating Your Vector
Identifier GUID-8262D3A1-403B-46B8-A481-2ED05F9B457A
Language EN-US
Description
Version 2
Revision 4
Changes Add variable for Rally.
Status Released
Last Modified 26/05/2021 09:30:11
Author pruekatie
Updating the Rally Software Using the Edge Device
Before you can update the software, you must pair your Edge device with your Rally system.
1 Send your ride data to your Garmin Connect account (Sending Your Ride to Garmin Connect, page 94).
Garmin Connect automatically looks for software updates and sends them to your Edge device.
2 Bring your Edge device within range (3 m) of the sensor.
3 Rotate the crank arm a few times. The Edge device prompts you to install all pending software updates.
4 Follow the on-screen instructions.
86 Wireless Sensors