Title Projecting a Location
Identifier GUID-1D4A6E4A-1176-4CF8-9AFF-5BFBD350E22E
Language EN-US
Description
Version 5
Revision 3
Changes Updated conditions for 1030; dropping 1000
Status Released
Last Modified 14/08/2017 13:45:31
Author cozmyer
Projecting a Location
You can create a new location by projecting the distance and bearing from a marked location to a new location.
1 Select Navigation > Saved Locations.
2 Select a location.
3 Select the location information at the top of the screen.
4 Select > Project Location.
5 Enter the bearing and distance to the projected location.
6 Select .
Title Courses (Edge 1030 Plus)
Identifier GUID-7416CBA5-CEA0-45A5-B7D8-4D9B36419E6B
Language EN-US
Description
Version 2
Revision 3
Changes Added a condition to creating courses on the device.
Status Released
Last Modified 16/10/2020 15:52:51
Author cozmyer
Courses
You can send a course from your Garmin Connect account to your device. After it is saved to your device, you
can navigate the course on your device. You can also create a custom course on your device.
You can follow a saved course simply because it is a good route. For example, you can save and follow a bike
friendly commute to work. You can also follow a saved course, trying to match or exceed previously set
performance goals.
Navigation 53
To Next Page
Loading...
