Title Pairing Your ANT+ Indoor Trainer
Identifier GUID-4A11E0FF-E539-412E-B959-1E709CFF63A3
Language EN-US
Description
Version 1
Revision 3
Changes Save as. Pairing slightly different than sensors now.
Status Released
Last Modified 14/08/2017 13:45:22
Author cozmyer
Pairing Your ANT+
®
Indoor Trainer
1 Bring the device within 3 m (10 ft.) of the ANT+ indoor trainer.
2 Select Training > Indoor Trainer > Pair ANT+ Bike Trainer.
3 Select the indoor trainer to pair with your device.
4 Select Add.
When the indoor trainer is paired with your device, the indoor trainer appears as a connected sensor. You can
customize your data fields to display sensor data.
Title Using an ANT+ Indoor Trainer
Identifier GUID-8826CB17-DD0D-40F9-89BB-D93C1E8534CF
Language EN-US
Description
Version 6
Revision 3
Changes Added free ride option.
Status Released
Last Modified 16/10/2020 15:55:33
Author cozmyer
Using an ANT+ Indoor Trainer
Before you can use a compatible ANT+ indoor trainer, you must mount your bike on the trainer and pair it with
your device (Pairing Your ANT+
®
Indoor Trainer, page 29).
You can use your device with an indoor trainer to simulate resistance while following a course, activity, or
workout. While using an indoor trainer, GPS is turned off automatically.
1 Select Training > Indoor Trainer.
2 Select an option:
• Select Free Ride to manually adjust the resistance level.
• Select Follow a Course to follow a saved course (Courses, page 53).
• Select Follow an Activity to follow a saved ride (Going for a Ride, page 15).
• Select Follow a Workout to follow a saved workout (Workouts, page 21).
3 Select a course, activity, or workout.
4 Select Ride.
5 Select to start the activity timer.
The trainer increases or decreases resistance based on the elevation information in the course or ride.
Training 29
To Next Page
Loading...
