Title Pairing Your Wireless Sensors
Identifier GUID-E2E2DC23-7B94-43B4-A30D-5FF32270BEC4
Language EN-US
Description
Version 6
Revision 3
Changes Updated menu path conditions
Status Released
Last Modified 08/04/2019 15:43:58
Author cozmyer
Pairing Your Wireless Sensors
Before you can pair, you must put on the heart rate monitor or install the sensor.
Pairing is the connecting of ANT+ or Bluetooth wireless sensors, for example, connecting a heart rate monitor
with your Garmin device.
1 Bring the device within 3 m (10 ft.) of the sensor.
NOTE: Stay 10 m (33 ft.) away from other riders' sensors while pairing.
2 Select > Sensors > Add Sensor.
3 Select an option:
• Select a sensor type.
• Select Search All to search for all nearby sensors.
A list of available sensors appears.
4 Select one or more sensors to pair with your device.
5 Select Add.
When the sensor is paired with your device, the sensor status is Connected. You can customize a data field
to display sensor data.
Title Training with Power Meters - OM
Identifier GUID-050A305A-E611-4D2C-AEE5-088E683F1398
Language EN-US
Description
Version 4
Revision 3
Changes Adding Rally. Ok to use after announcement.
Status Released
Last Modified 11/03/2021 11:11:40
Author wiederan
Training with Power Meters
• Go to www.garmin.com/intosports for a list of ANT+ sensors that are compatible with your device (such as
Rally
™
and Vector
™
).
• For more information, see the owner's manual for your power meter.
• Adjust your power zones to match your goals and abilities (Setting Your Power Zones, page 83).
• Use range alerts to be notified when you reach a specified power zone (Setting Range Alerts, page 103).
• Customize the power data fields (Adding a Data Screen, page 101).
82 Wireless Sensors
To Next Page