190-00709-05 Rev. D
Garmin G1000 Pilot’s Guide for the Socata TBM 850/900
261
FLIGHT MANAGEMENT
FLIGHT PLAN VIEWS
Information about flight plans can be viewed in more than one way. The active flight plan can be configured
to show cumulative distance over the length of the flight plan or the distance for each leg of the flight plan;
and the active flight plan can be viewed in a narrow or wide view. In the wide view, additional information is
displayed: Fuel Remaining (FUEL REM), Estimated Time Enroute (ETE), Estimated Time of Arrival (ETA), and
Bearing to the waypoint (BRG).
Switching between leg-to-leg waypoint distance and cumulative waypoint distance:
1) Press the FPL Key on the MFD to display the Active Flight Plan Page.
2) Select the VIEW Softkey to display the CUM and LEG-LEG Softkeys.
3) Select the CUM Softkey to view cumulative waypoint distance, or select the LEG-LEG Softkey to view leg-to-leg
waypoint distance.
4) Select the BACK Softkey to return to the top level active flight plan softkeys.
Figure 5-86 Active Flight Plan - Leg to Leg vs. Cumulative Distance
WIDE Softkey, NARROW Softkey, LEG-LEG Softkey, CUM Softkey
Active Flight Plan Leg to Leg Distance Active Flight Plan Cumulative Distance
Switching between wide and narrow view:
1) Press the FPL Key on the MFD to display the Active Flight Plan Page.
2) Select the VIEW Softkey to display the WIDE and NARROW Softkeys.
3) Select the WIDE Softkey to display the wide view, or select the NARROW Softkey to display the narrow view.
4) Select the BACK Softkey to return to the top level active flight plan softkeys.
To Next Page
Loading...
Need help?
General
