Garmin G1000 Guide

Garmin G1000 Pilot’s Guide for the Socata TBM 850/900
190-00709-05 Rev. D
76
FLIGHT INSTRUMENTS
OBS Course
Figure 2-32 Omni-bearing Selector (OBS) Mode
Pressing the OBS
Softkey Again Disables
OBS Mode
GPS
Selected
OBS
Mode
Enabled
Pressing the OBS
Softkey Enables OBS
Mode
Enabling/disabling OBS Mode while navigating a GPS flight plan:
1) Press the OBS Softkey to select OBS Mode.
2) Turn a CRS Knob to select the desired course to/from the waypoint. Press the CRS Knob to synchronize the
Selected Course with the bearing to the next waypoint.
3) Press the OBS Softkey again to return to automatic waypoint sequencing.
As the aircraft crosses the missed approach point (MAP), automatic approach waypoint sequencing is
suspended. SUSP appears on the HSI at the lower right of the aircraft symbol. The OBS Softkey label changes
to indicate the suspension is active as shown in Figure 2-33. Selecting the SUSP Softkey deactivates the
suspension and resumes automatic sequencing of approach waypoints.
SUSP
Softkey
Figure 2-33 Suspending Automatic Waypoint Sequencing
SUSP Annunciation

Garmin G1000 Specifications

General

Display Type	LCD
Primary Flight Display (PFD)	Yes
Multi-Function Display (MFD)	Yes
Terrain Awareness	Yes
Autopilot Integration	Yes
Integrated Flight Deck System	Yes
Weather Radar	Optional
Traffic Advisory System (TAS)	Optional
Terrain Awareness and Warning System (TAWS)	Yes
Resolution	1024 x 768 pixels
Weather Data	Yes
Navigation	Yes
AHRS	Yes
Air Data Computer (ADC)	Yes
Interfaces	ARINC 429, RS-232
Certification	TSO certified
Traffic Information	Optional (requires ADS-B or TCAS)