MDE-5411A ForeHB Islander Prime Installation Manual · October 2018 Page 3
1.4 Manual Structure Introduction
1.4 Manual Structure
Section 1: Introduction
This section provides a general description of the system.
Section 2: System Overview
This section provides a general description of the Islander Prime system.
Section 3: Preliminary Guidelines
This section provides the preliminary installation requirements and procedures to be
performed before installing the Islander Prime system.
Section 4: Installation Procedures
This section provides a detailed description of the Islander Prime installation requirements and
procedures.
Section 5: Maintenance
This section provides general maintenance instructions for Islander Prime.
Section 6: Troubleshooting
This section provides a comprehensive troubleshooting guide for Islander Prime.
1.5 References
This manual provides installation instructions for the Islander Prime Fuel Island Controller
and integrated modules.
For specific installation and setup instructions not included in this manual, refer to the
following manuals:
• MDE-4868 OrPAY1000 Installation and Setup Manual
• MDE-4817 SiteOmat Installation and Maintenance Manual
• G2 Panel Printer Installation and Setup Manual, P/N 800919900
To Next Page
Loading...
Need help?
General
