3.CONNECTING PORTABLE STORAGE/ENTERPRISE STORAGE WITH THE SR-1000
3 CONNECTING PORTABLE STORAGE/ENTERPRISE
STORAGE WITH THE SR-1000
For installation of Portable Storage or Enterprise Storage, please refer to Installation Manual for
Portable Storage and Enterprise Storage.
3.1 Connecting the Portable Storage
1. Take out the adapter from the packaging and connect to the DC power connector.
2. Connect the eSATA cable to the back panel for data transfer.
Figure 8: Connect eSATA cable to the Portable Storage
Making the connections to the SR-1000
3. Insert the eSATA cable into the SR-1000 eSATA port.
Figure 9: Insert eSATA cable into SR-1000 eSATA port
NOTE: To use Portable Storage as the content source, it MUST be connected to the eSATA port
of the SR-1000 board.
To Next Page
Loading...
