15. SR-1000 INPUT AND OUTPUT
15.6.2 Audio input/output solution using AIB-2000 (suitable for
connection to digital Amplifiers)
It is assumed that the digital Amplifiers have both AES3 digital inputs and analog inputs with
automated switching between digital inputs and analog inputs; the AES3 digital output from
the SR-1000 may be fed directly to the amplifier's digital inputs and only the analog sources
may be routed via the AIB-2000 to the analog inputs of the Amplifiers.
Figure 48: I/O Solution for Digital Amplifier
Note: The SR-1000 Automation should be used to switch between the analog sources to the
AIB-2000 as well as between the analog and digital AES3 inputs on the digital Amplifiers to
ensure that the correct source is routed to the sound system.
To Next Page
Loading...
