GDC SR-1000 - 5.5 Device Configuration

- 36 -
February 07
th
, 2022
INSTALLATION MANUAL FOR SR-1000
STANDALONE INTEGRATED MEDIA BLOCK™
User Manual
12. AUTOMATION SETUP
12.7 Automation setup for USL DAX devices
The SR-1000 supports automation for USL DAX sound processor. Follow the steps below to
configure a USL DAX device in the server automation interface.
1. Under the Automation tab in the menu, click the Device sub-tab.
2. On the left column, click create.
3. Select USL-DAX as the device type. Enter the name of the USL DAX device, and click
OK.
4. Enter the IP address of the USL DAX device.
5. Click Save to save the settings.
Figure 42: USL DAX device setting