GE Dash 3000 - Page 200

Field replaceable units: Recommended checkout
7-54 Dash 3000/4000/5000 2000966-542D
NBP assembly “NBP
calibration” on
page 8-37.
 “Noninvasive blood pressure tests” on page 8-
35.
 “Electrical safety tests” on page 8-4.
Wireless LAN None  “Patient monitor power-up tests” on page 8-21.
 “Network test (option)” on page 8-46.
 “Wireless antenna signal strength test (option)”
on page 8-49.
 “Wireless LAN test (option)” on page 8-52.
Wireless card None  “Wireless antenna signal strength test (option)”
on page 8-49.
 “Wireless LAN test (option)” on page 8-52.
Power supply
assembly
None  “Patient monitor power-up tests” on page 8-21.
 “Wireless antenna signal strength test (option)”
on page 8-49. Use this procedure if the wireless
option is installed.
 “Wireless LAN test (option)” on page 8-52. Use
this procedure if the wireless option is installed.
CPU “End-tidal
CO2 test
(option)” on
page 8-44.
“NBP
calibration” on
page 8-37.
 “Patient monitor power-up tests” on page 8-21.
 “Analog output and defibrillator synchronization
tests” on page 8-40.
 “Graph or print tests (option)” on page 8-44.
 “Display test” on page 8-45.
 “Speaker test” on page 8-46.
 “Network test (option)” on page 8-46.
 “Wireless antenna signal strength test (option)”
on page 8-49. Use this procedure if the wireless
option is installed.
 “Wireless LAN test (option)” on page 8-52. Use
this procedure if the wireless option is installed.
 “TRAM-rac 2A module housing peripheral
device test (option)” on page 8-54.
Writer, writer flex None  “Patient monitor power-up tests” on page 8-21.
 “Graph or print tests (option)” on page 8-44.
 “Wireless antenna signal strength test (option)”
on page 8-49. Use this procedure if the wireless
option is installed.
 “Wireless LAN test (option)” on page 8-52. Use
this procedure if the wireless option is installed.
Recommended calibration, electrical safety tests, and checkout procedures
Replacement
procedure
Calibration
tests
Checkout procedures Electrical safety tests